Unipulse F320 - 14 ．Self-Check Function and Initialization; Self-Check

14.SELF-CHECK FUNCTION AND INITIALIZATION
101
14. SELF-CHECK FUNCTION AND INITIALIZATION
14-1. Self-Check
The F320 incorporates the Self-check Function to detect errors in the internal
circuits and in programs and the Visual-check Function to visually check the
indicator.
The self-check is completed in 30 seconds. The display " " should
appear, then the indicate value should follow.This ensures that the F320 is in
normal operation.
1）Turn off the power to the F320.
2）Turn on the power with key held down.
HOLD
Setting Method