Unipulse F320 - 7 Hold Function; Peak Hold

7HOLD FUNCTION
66
7 HOLD FUNCTION
7-1. Peak Hold
• Peak Hold Operation
Key input
HOLD LED
Peak hold start Peak hold reset
Time
Indicated value
Sensor input value
PEAK LED
LED ONLED OFF LED OFF
LED OFF LED Blinking LED OFF
Peak hold section
Hold input
HOLD
• If the hold function is turned ON by external signal input, turn
OFF the hold function by external signal input, and if the hold
function is turned ON by key input, turn OFF the hold function
by key input.
• For the connection of the hold input terminals,
see "Connecting Hold and Digital Zero Signals"on page 19.