Unipulse F320 - Display Frequency

6.SETTING OF FUNCTIONS
63
6-16. Display Frequency
The Display frequency function is used to select the times the indicated values
are displayed per second. A/D conversion count is fixed to 2000 per second.
1) Select setting mode 3.
2)
Select display frequency.
Use and key to set the display frequency,
then use key to validate the setting.
To return to the indicated value display, press key.
FNC
＋ －
ZERO ZERO
Press six times.
CAL
HOLD
GAIN
CAL
ZERO
HOLD
FNC
＋ －
Setting of Display Frequency
3 : 25times/sec.
2 : 13times/sec.
Display Frequency
1 : 6times/sec.
0 : 3times/sec.