Unipulse F320 - General Specifications; Accessories

16.SPECIFICATIONS
114
16-7. General Specifications
Power voltage AC spec: 100V to 240V AC（+10% -15%）
[Free power supply 50Hz/60Hz]
DC spec: 12V to 24V DC ( ± 15%)
(Depending on the request at the time of order)
Power consumption AC spec: 15W max.
DC spec: 15W max.
Rush current（Reference value）
AC spec:
15A, 2msec:100V AC mean load state
(ordinary temperature, at cold-start time)
30A, 2msec:200V AC mean load state
(ordinary temperature, at cold-start time)
DC spec:
4A, 25msec:12V DC mean load state
(ordinary temperature, at cold-start time)
3A, 20msec:24V DC mean load state
(ordinary temperature, at cold-start time)
Ambient conditions Temperature: Operation -10 ℃ to +40 ℃
Storage -40 ℃ to +80 ℃
Humidity: 85％RH（non-condensation）
Dimensions 96W × 48H × 127.3D（mm）（excluding protrusions）
Panelcutout dimension 92 × 45 （mm）
Weight Approx.700g
16-8. Accessories
AC cable* One
Ferrite core for power cable* One
Ferrite core for sensor cable One
Terminating resistance One
3P-2P conversion adapter* One
BCD output connector One set (when the BCO option is equipped)
Operation manual One
* :It is attached only at the AC power source specification.
+1
- 0