Unipulse F320 - 9-2-4 Rs-485 ID

9.RS-485 INTERFACE (Communication protocol; Modbus-RTU)
75
9-2-4. RS-485 ID
Set the ID of the F320.
1) Select setting mode 4.
2) Select RS-485 ID.
Use and keys to set the RS-485 ID,
then use key to validate the setting.
To return to the indicated value display, press key.
Press three times.
FNC
＋ －
ZERO
Press twice.
HOLD
CAL
GAIN
CAL
ZERO
HOLD
FNC
＋ －
Setting of RS-485 ID
RS-485 ID（01 to 32）