INTRODUCTION
INTRODUCTION
The F320 is a digital indicator for a strain gauge sensor, DIN96×48mm in size.
It is best suited for quality control in production lines, including pressure load control of
pressing, pressurizing, caulking, etc., and torque control of rotating devices.
The RS-485 (protocol; Modbus-RTU) is included as standard, which facilitates introduction
into a system that is formed by using the Modbus protocol.
To take full advantage of the F320’s excellent performance and to use it safely, carefully read
this operation manual and properly understand the descriptions in this manual before use.
To Next Page
Loading...
