Unipulse F320 - Page 51

5.CALIBRATION
37
• Releasing Calibration LOCK
1) Select setting mode 3.
2) Select calibration lock.
Use and key to set the calibration lock of
OFF（0）． then use key to validate the setting.
To return to the indicated value display, press key.
FNC
＋ －
ZERO ZERO
Press twice.
HOLD
CAL
GAIN
CAL
HOLD
FNC
＋ －
Releasing Calibration LOCK
Calibration LOCK
1 : ON
0 : OFF