Uponor Smatrix Wave PULSE User Manual

Local Wi-Fi connection
The Uponor Smatrix PULSE app (A) communicates with the room
controller (C) via the local Wi-Fi network.
• The mobile device connects to the same Wi-Fi router (E) as the
communication module (B).
• The communication module (B) and Wi-Fi router (E) are
connected using either Wi-Fi or efternet.
• The sub room controller (D) communicates via the master room
controller (C).
When is this method is used?
• During normal operation when connected to the same local Wi-
Fi network.
Remote connection
The Uponor Smatrix PULSE app (A) communicates with the room
controller (C) via a remote connection.
• The mobile device connects toUponor cloud services (F) over
internet (via local Wi-Fi or mobile network).
• Uponor cloud services (F) connect to the communication module
(B) via the local internet connected Wi-Fi router (E).
• The communication module (B) and Wi-Fi router (E) are
connected using either Wi-Fi or efternet.
• The sub room controller (D) communicates via the master room
controller (C).
When is this method is used?
• During normal operation when outside the local Wi-Fi network.
• During normal operation when connected to the same local Wi-
Fi network.
API connection
Note
API connection only supports external control.
The external system (G) communicates with the room controller (C)
via an Application Programming Interface (API). An external system
can be a heat pump, a smart home system, or a voice control
assistant etc.
• The external system (G) uses an API to communicate with
Uponor cloud services (F).
• Uponor cloud services (F) connect to the communication module
(B) via the local internet connected Wi-Fi router (E).
• The communication module (B) and Wi-Fi router (E) are
connected using either Wi-Fi or efternet.
• The sub room controller (D) communicates via the master room
controller (C).
When is this method is used?
• When external systems, such as heat pumps, smart home
systems, voice control assistants etc, communicate with the
Uponor Smatrix PULSE system.
20
|
Uponor Smatrix Wave PULSE
|
Installation and operation manual

Uponor Smatrix Wave PULSE Specifications

General

Type	Wireless Temperature Controller
Communication Protocol	RF (Radio Frequency)
Compatibility	Uponor Smatrix Wave system
Operating Temperature Range	0°C to 50°C
Display	LCD
Control	Wireless