Uponor Smatrix Wave PULSE

14 Operate Uponor Smatrix Wave
thermostats
14.1
Thermostat type
Two types of thermostats, both analogue and digital, can be used in
an Uponor Smatrix Wave system.
Analogue thermostats
Uponor Smatrix Wave T‑161
Uponor Smatrix Wave T‑163
Uponor Smatrix Wave T-165
The analogue thermostats are controlled by either turning a dial
(T-165), adjusting a potentiometer on its back (T-163), or via the
Uponor Smatrix PULSE app (requires communication module).
Digital thermostats
Uponor Smatrix Wave T‑166
Uponor Smatrix Wave T‑168
Uponor Smatrix Wave T-169
The digital thermostats have a display relaying information to the user
and buttons for control.
14.2 Thermostat layout
Uponor Smatrix Wave T-161
During normal operation the thermostat is monitored and controlled
via the Uponor Smatrix PULSE app (requires communication
module).
The illustration below shows the parts of the thermostat.
BA
D
C
CD0000043
Item Description
A Low battery level LED (flashes once every two hours)
B Registration button
C Terminal for external sensor (non-polarised)
D Battery
Uponor Smatrix Wave PULSE
|
Installation and operation manual
|
81