Uponor Smatrix Wave PULSE

6. Registration
CNF
09
NO
09
SI0000125
The connection indicator is shown in the thermostat display to show
that the registration process begins.
The text Int YES is shown in the thermostat display and the LEDS on
the relay module start flashing fast again, to turn off a few seconds
later.
7. Confirm registration
SI0000118
Press OK to confirm the parameter change.
8. Exit settings menu
3 s
SI0000119
Press and hold the OK button for about 3 seconds to exit the settings
menu.
Uponor Smatrix Wave PULSE
|
Installation and operation manual
|
71