Uponor Smatrix Wave PULSE User Manual

07 Cooling allowed
In this menu it is set whether cooling is allowed in the room or not.
This menu is not visible if a communication module is connected to
the system. The setting is then available in the Uponor Smatrix
PULSE app.
See Change settings, Page 90, for how to change the setting.
Uponor Smatrix Wave T-166
Display text Description
Yes Shows the cooling demand icon
No Hides the cooling demand icon
Uponor Smatrix Wave T-168
Display text Description
Yes Shows the cooling demand icon
No Hides the cooling demand icon
Uponor Smatrix Wave T-169
Symbol Description
Shows the cooling demand icon
Hides the cooling demand icon
08 Display unit
In this menu temperature display unit is set.
See Change settings, Page 90, for how to change the setting.
Uponor Smatrix Wave T-166
Display text Description
DEg ˚C Degrees Celsius
DEg ˚F Degrees Fahrenheit
Uponor Smatrix Wave T-168
Display text Description
DEg ˚C Degrees Celsius
DEg ˚F Degrees Fahrenheit
Uponor Smatrix Wave T-169
Symbol Description
Degrees Celsius
Degrees Fahrenheit
09 Climatic controller integration
In this menu it is set whether the thermostat also should be
integrated, and share temperature data, with an Uponor Smatrix
Move supply controller.
This menu can also be used when registering the thermostat to a
relay module. Using the relay module to control distributed manifolds.
Default value: no
See Change settings, Page 90, for how to change the setting.
Uponor Smatrix Wave T-166
Display text Description
no Not integrated
YEs Integrated (requires to be registered with the Move
supply controller first)
CnF Register with the Move supply controller/relay
module, confirm on the Move supply controller/relay
module
Uponor Smatrix Wave T-168
Display text Description
no Not integrated
YEs Integrated (requires to be registered with the Move
supply controller first)
CnF Register with the Move supply controller/relay
module, confirm on the Move supply controller/relay
module
Uponor Smatrix Wave T-169
Symbol Description
Not integrated
Integrated (requires to be registered with the Move
supply controller first)
Register with the Move supply controller/relay
module, confirm on the Move supply controller/relay
module
10 Time and date (T-168 only)
In this menu time and date is set. This setting is required to utilise
scheduling programs for this thermostat.
If another programmable digital thermostat is registered to the room
controller (with a lower channel number), or if the Uponor Smatrix
PULSE app is used, they will push the set time and date to the
thermostat. Then only the 12/24 h setting is available.
Use buttons - or + to change the value. Press the OK button to set
the value and move to the next editable value.
Values will be set in the following order.
1. Hours
2. Minutes
3. 12/24h mode
4. Day of the week (1 = Monday, 7 = Sunday)
5. Day of the month
6. Month
7. Year
See Change settings, Page 90, for how to change the setting.
11 Room temperature calibration
Default: 0.0 ˚C
Setting range: -6.0 – 6.0 ˚C, 0.1 ˚C increments
In this menu the room temperature shown in the thermostat display
can be calibrated.
See Change settings, Page 90, for how to change the setting.
12 Invert screen (T-169 only)
In this menu the colour in the display can be inverted.
See Change settings, Page 90, for how to change the setting.
94
|
Uponor Smatrix Wave PULSE
|
Installation and operation manual

Uponor Smatrix Wave PULSE Specifications

General

Type	Wireless Temperature Controller
Communication Protocol	RF (Radio Frequency)
Compatibility	Uponor Smatrix Wave system
Operating Temperature Range	0°C to 50°C
Display	LCD
Control	Wireless