Uponor Smatrix Wave PULSE User Manual

Uponor Smatrix Wave T-161
3
3.1
3.2
4.1
4.2
4
1 2
SI0000193
To factory reset the thermostat:
1. Remove the thermostat from the wall.
2. Remove the battery from the thermostat.
3. Press and hold the registration button on the thermostat while
inserting the battery again.
4. Release the button after about 10 seconds when the LED start
flashing.
5. The thermostat is now reset to factory default.
Uponor Smatrix Wave T-163
3
4
1
2
SI0000194
To factory reset the thermostat:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Gently press and hold the registration button on the thermostat,
release when the demand LED starts flashing.
4. Change the Disable timer switch twice, regardless of starting
position.
5. The thermostat is now reset to factory default.
Uponor Smatrix Wave T-165
3
4
1
2
SI0000195
To factory reset the thermostat:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Gently press and hold the registration button on the thermostat,
release when the demand LED starts flashing.
4. Change the Disable timer switch twice, regardless of starting
position.
5. The thermostat is now reset to factory default.
Uponor Smatrix Wave T-166/T-168
5 s
SI0000196
To factory reset the thermostat:
1. Press and hold the -, + and OK buttons for about 5 seconds until
the screen goes blank.
2. The thermostat is now reset to factory default.
Uponor Smatrix Wave T-169
5 s
SI0000197
To factory reset the thermostat:
1. Press and hold the
, and OK buttons for about 5 seconds
until the screen goes blank.
2. The thermostat is now reset to factory default.
96
|
Uponor Smatrix Wave PULSE
|
Installation and operation manual

Uponor Smatrix Wave PULSE Specifications

General

Brand	Uponor
Model	Smatrix Wave PULSE
Category	Temperature Controller
Language	English