System Menu
ADVANCED OPERATION GUIDE 6-5
6
Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details.
Use the procedure below to set the sound options.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.
3
Press [Change] of
Volume, Key
Confirmation, Job
Finish, Ready, or
Warning.
4
Select the buzzer volume level, or other sound options.
5
Press [Close].
Item Value Description
Volume 0 (Mute), 1 (Minimum)
to
5 (Maximum)
Set the buzzer volume
level.
Key
Confirmation
Off, On Emit a sound when the
control panel and touch
panel keys are pressed.
Job Finish Off, On Emit a sound when a print
job is normally completed.
Ready Off, On Emit a sound when the
warm-up is completed.
Warning Off, On Emit a sound when errors
occur.
Common Settings - Buzzer
Change
Volume:
3 Medium
Change
ChangeChange
Change
Job Finis h:
Off
Warning:
Off
End
10/10/2007 10:10
Key Confirmation:
Off
Ready:
On
CloseReturn to Top
To Next Page
Loading...
Need help?
General
