System Menu
6-80 ADVANCED OPERATION GUIDE
The Folder (FTP) Address
1 Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
* If you specify a port number other than the default (21), use the
“Host name: port number” format. (E.g. FTPhostname:140)
** Use single-byte alphanumeric characters to specify the path. If you
use Japanese (double-byte) characters, transmission will fail.
NOTE: Refer to the Operation Guide for entering characters.
2 Check if the entries are correct and press [OK].
NOTE: Press [Connection Test] to check the connection to the FTP
server you chose. If the connection fails, check the entries you made.
Item Description
Max. No. of
Characters
Host name* FTP server host name or IP
address
62 chars
Path** Path for the file to be stored
E.g.
“\User\ScanData”
If no path is entered, the file is
stored in the home directory.
126 chars
Login user
name
User name FTP server login 62 chars
Login
password
Password for FTP server login 62 chars
Addres s - Folder Path Entry
SMB
OK
Status 10/10/2007 10:10
Cancel
FTP
Host Name
Path
Login
User Name
Login
Pass word
Connec tion
Test
To Next Page
Loading...
Need help?
General
