System Menu
ADVANCED OPERATION GUIDE 6-81
6
The Folder (SMB) Address
1 Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
The table below explains the items to be entered.
* If you specify a port number other than the default (139), use the
“Host name: port number” format. (E.g. SMBhostname:140)
** Use single-byte alphanumeric characters to specify the path. If you
use Japanese (double-byte) characters, transmission will fail.
NOTE: Refer to the Operation Guide for entering characters.
2 Check if the entries are correct and press [OK].
NOTE: Press [Connection Test] to check the connection to the computer
you chose. If the connection fails, check the entries you made.
11
Check if the destination entry is correct and press [Register]. The
destination is added to the Address Book.
Item Description
Max. No. of
Characters
Host name* Host name or IP address of the
sending computer
62 chars
Path** Path to the folder used to save
files
E.g.
“\User\ScanData”
126 chars
Login user
name
User name for folder access
For example,
abcdnet\james.smith
62 chars
Login
password
Password for folder access 62 chars
Addres s - Folder Path Entry
SMB
OK
Status 10/10/2007 10:10
Cancel
FTP
Host Name
Path
Login
User Name
Login
Password
Connec tion
Test
To Next Page
Loading...
Need help?
General
