MC122 - MCP-4J Control Unit Section 2 - Safety and Use
3
Section 2 - Safety and Use
Read Thoroughly Before Handling Equipment
WARNING! Read and follow all safety precautions, warnings, cautions, and other recommendations in
this manual. OTHERWISE, DEATH, PERSONAL INJURY OR EQUIPMENT DAMAGE
COULD OCCUR.
Read this entire section before handling the equipment.
Symbols
The following symbols may be used on the equipment and/or in this manual.
This symbol represents a Caution or a Warning. Cautions draw special attention to anything that
could damage equipment or cause the loss of data. Warnings draw special attention to anything that
could injure or kill the reader. Both Cautions and Warnings are placed before the step they apply to.
This symbol represents a Hot Surface.
This symbol represents a Puncture Risk. It is usually used in regard to nozzle cleaning appliances
and other sharp instruments that can cause puncture wounds and risk exposure to bloodborne
pathogens and other debris.
This symbol means that Working Gloves are required.
This symbol means that Goggles are required.
This symbol indicates a Shock Hazard. There is a presence of non-insulated dangerous voltage
within the product’s enclosure. This voltage may cause electrical shock or fire.
This symbol indicates the need to Unplug/Disconnect All Power Sources and to let them de-energize
before attempting any type of work or maintenance. Remember that there can still be energy in
equipment, cords, and wires even when unplugged/disconnected.
This symbol indicates the need to Lock Out All Power Sources and to let them de-energize before
attempting any type of work or maintenance. If power is not locked out, the person working on the
equipment may be injured or killed if someone unknowingly switches on the power to the equipment.
This symbol indicates a Note. Notes point out something of special interest or importance to the
reader. They give tips, hints, and information in addition to what is necessary for the step preceding
it.