MC122 - MCP-4J Control Unit Section 4 - Programming
37
Application
(All Applications)
Application - Many applications are available. Each application type has “built in, behind-the-scenes” default settings
to assist you in programming the unit for the application type. If your application type is not listed, simply choose
“other.” (Use the Plus/Minus Buttons as needed to scroll through the choices.)
Actual application options may vary based on the system.
pplication Description
Corrugated Applying glue to partial-assembly points of corrugated material in a Flexofolder
gluing system (end product folded flat).
Folding Carton Applying glue to folding carton partial-assembly points (end product folded flat)
Envelope Applying glue to envelope assembly points
Packaging Applying glue to erected-and-filled boxes for closing/sealing
Core Winding Applying glue to paper stock that is wound to create roll cores (for paper towels,
bathroom tissue, etc.)
Timer Mode for monitoring product location in system flow
Valve Driver Mode for controlling valve power levels based on PLC input
Burn-In Test Test function used ONLY by Valco Melton personnel
Others Unique applications not listed in standard options
X7
To Next Page
Loading...
Need help?
General