Section 4 - Programming MC122 - MCP-4J Control Unit
40
Jog Mode
(Corrugated, Folding Carton, Envelope, Packaging, and Others)
Jog Mode - Adhesive will be applied in a “dot” pattern when the machine is running below a certain speed (V-jog).
(Enabling jog mode allows Jog Mode Setup Menus to appear during setup; this is covered later in this manual.)
Finish Configuration
(All Applications)
You must answer “Yes” to the “Finish Configuration” prompt
and press the OK Button for all changes to take effect.
Choosing “No” will return the unit to the wizard application
screen.
To Next Page
Loading...
Need help?
General