Section 4 - Programming MC122 - MCP-4J Control Unit
50
Change the Level 2 Default Password
The Level 2 Default Password (1234) can be changed to a different numerical password containing four digits.
To change the Default Password for Level 2, do the following:
Use the Plus/Minus Buttons to increase/decrease the numbers and the Left/Right Arrow Buttons to move from digit to
digit.
To cancel without changing the password, be sure the
current password showing is correct, and (only after this
confirmation), press the OK Button.
When the desired password is entered, press the OK Button to enter the new password.
To Next Page
Loading...
Need help?
General