MC122 - MCP-4J Control Unit Section 5 - Operation
81
Valve Status
The second diagnostic screen shows the valve status. The top numbers show the valve type. The bottom numbers
will switch back and forth from showing the valve voltage to showing the valve status (enabled or disabled).
A voltage reading of 0.0 could indicate a blown fuse. See
Section 8, Parts List, for fuse numbers and placement.
Scanner and Trigger Status
The scanner/trigger information screen displays the scanner and trigger settings.
Version Information
The version information screen displays the CPU, the Logic (PLD), and the MCP-4J name.
Control Information
The control information screen displays the current application and glue station, if applicable.
To Next Page
Loading...
Need help?
General