MC122 - MCP-4J Control Unit Section 5 - Operation
69
Batch Counter
(All Applications)
Batch Counter must be enabled under the Setup Menu (see Section 4 - Programming).
Batch Counter--On/Off - Turn the batch counter on and off with the “switch” using the Plus/Minus Buttons.
Batch Counter--Skip - The total number of products for which the pattern will be skipped (no adhesive will be
applied).
Batch Counter--Glue - The total number of products the adhesive pattern will be applied to, one after the other
without skipping any products.
Input Values/Gluing Mode
Depending on the application and the gluing mode chosen, input your values:
The screens above are unique to each gluing mode. Each screen is designed to show comprehensive information at a
glance. The following subsection “Glue Mode Screen Information” explains how.
Folding Carton, Envelope,
Timer, Packaging and Others)
(Corrugated, Folding Carton, Envelope,
Timer, Core Winding, Packaging and Others)
(Core Winding and Others
(Corrugated, Folding Carton, Timer, Core
Winding, Valve Driver, Packaging and Others)
To Next Page
Loading...
Need help?
General