10 Now select the Access Timers tab.
11 Define the following Timers options:
a) Using the Unlock Time drop down box, define the number of seconds the door will be unlocked before
the lock re-engages.
b) Using the Door Held Open Detect Time drop down box, define the amount of time a door can be
held open before the system is alerted.
12 Define following Special Access Timers options:
a) Using the Unlock Time drop down box, define the number of seconds a door will be unlocked for a
person with Special Access before the lock re-engages.
b) Using the Door Held Open Detect Time drop down box, define the amount of time a door can be
held open, after being unlocked by someone with Special Access, before the system is alerted.
13 Select the Advanced Settings tab in the bottom half of the screen.
14 Define the following options in the Connection section:
a) Select the Gateway that the lock is connected to from the Hub drop down box.
b) Set the Device # from Linking Tool to the exact number specified by the Allegion ENGAGE Mobile
App. Please see the LE Wireless Lock section of the installation guide for more details.
c) Installed. Click this box if this lock is currently installed on the system.
15 Select the desired options in the Enable state change event reporting section:
To Next Page
Loading...
Need help?
General
