VEMCO – VR100 Manual 28 May 2018 50
3. Acoustic Release (VR2AR only – see section 4.4.5)
a. Release Status – reports VR2AR state (i.e. unarmed), depth, release battery remaining, and
horizontal range.
b. Arm – alerts VR2AR that an activation command is likely to follow; acts as a safety feature
against accidently releasing the unit.
NOTE: Arming is not required for a VR2AR receiver with firmware 1.2.5 and up.
c. Activate – sends the release command to the VR2AR, causing the mooring lug to be released.
Activate is only available after VR2AR status is “armed”.
d. Read Pressure – reads the pressure and temperature from the pressure sensor. It displays °C,
PSI, bars, depth, and horizontal range in meters.
6.1.4 VR100 PC Software (VR100HS) Menu Structure
The menu structure of the VR100 PC software (VR100HS) is listed below. The tasks performed with this
software are explained in section 3 – Software.
From within theVR100 Receiver window:
A. File
a. Open
b. Save As…
c. Export
d. Exit
B. Logs
a. Get All Data
b. Get Recent Data
c. Erase VR100 Log
C. Settings
a. Tag Manager
I. File
1. New
2. Open
3. Save
4. Save As…
5. Exit
II. PC Setup
1. Add
i. Add Tag
2. Import
III. Receiver Setup
1. Refresh
b. Options
D. Help
a. Documentation
b. Support…
c. About VR100…
To Next Page
Loading...
