PROGRAMMING FOR THE OPTIONAL T1 AND ISDN (T1/PRI) CARDS DX-120 Programming Manual
- 176 -
Programming for the Translation Table via the DET (continued)
Setting the Evening Service Mode:
From the DB Item Select screen (see steps 1 through 3 on page 173):
4) Enter 07-05-03 XXX-4 (where XXX represents the appropriate table row number: 001~ 100).
5) Press save to display the Evening Destination screen.
6) Press chg.
7) Enter the number you want the C.O. to use for the Eve Mode, as needed.
8) Press save to store the setting.
9) Press next to go to the next row in the Translation Table (repeat steps previously shown for Incoming
Number, DAY, ALT, and EVE modes, as necessary).
OR
Press the Hold button to return to the previous menu level.
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
To Next Page
Loading...
