Vertical comdial DX-120 - Page 275

- 267 -
DX-120 Programming Manual BASIC CALL HANDLING PROGRAMMING TASKS
Programming Caller ID Codes and Local Calling Areas via the DET (continued)
PROGRAMMING THE CID CODES
Setting the International Code:
From the DB Item Select screen (see steps 1 through 3 above):
4) Enter 03-26.
5) Press save to display the International Prefix screen.
6) Press show to display the current setting.
7) Press chg.
8) Enter the code you want the system to dial (if any) when dialing international calls.
• The range is from 0 to 9999.
• The default is NULL (none).
9) Press save to store the number.
10)Press next to display the Country Code screen (now go to step 6 in “Setting the Country Code:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Setting the Country Code:
From the DB Item Select screen (see steps 1 through 3 on page 266):
4) Enter 03-27.
5) Press save to display the Country Code screen.
6) Press show to display the current setting.
7) Press chg.
8) Enter the code you want the system to dial (if any) when dialing international calls.
• The range is from 0 to 9999.
• The default is NULL (none).
9) Press save to store the number.
10)Press next to display the Long Distance Prefix screen (now go to step 6 in “Setting the Long Distance
Prefix:” below).
OR
Press the volume UP button to return to the DB Item Selection screen.
OR
Exit programming (see “Exiting Database Administration” on page 27).
Programming Caller ID Codes and Local Calling Areas via the DET (continued on next page)