Voicecall 3-70
Using Wave Phone Features
Wave Phone User Guide
Voicecall
Voicecall is a page directed to a specific digital phone extension that allows the receiving party
to reply.
Note: Typically, a phone has only one Voicecall button which requires input of an extension
number to be dialed and paged. However, additional Voicecall buttons may be programmed on
a phone to allow direct calls to other specific extensions. One possible example of the use of
multiple VoiceCall buttons might be a supervisor who has a Voicecall button with the standard
operation as shown below, as well as additional buttons that correspond to the supervisor’s
assistant or other members in their group for direct paging purposes. When entering an
extension number is not required, the page is placed directly.
Using the Voicecall Feature [S] / [D]
SIP AND DIGITAL PHONES
To Use Voicecall
1. Press the pre-programmed Voicecall button.
If your phone does not have a programmed Voicecall button, dial *82.
Listen for the dial tone.
2. Dial an extension.
The other party hears a tone on the phone speaker.
3. Begin speaking.
Note: Program extension for the Voicecall key. Vodavi/Triad/Infinite phones can not
program through the phone.
To Receive a Voicecall
If your phone is two-way, your speaker is automatically enabled during a voice call, and
you can speak to the other party through the speaker without pressing any keys.
If your phone is configured for one-way communication, the SPEAKER red LED flashes
during a voice call, and you can lift the handset or press the SPEAKER button to speak to
the calling party.
To Next Page
Loading...
