Hold 3-40
Using Wave Phone Features
Wave Phone User Guide
To Unpair the Bluetooth®
Follow steps 1 and 2 above, then in step 3, select 2 to “unpair” the Bluetooth® device. The
system will search for the device and, if successful, a “
DEVICE DE-REGISTERED” will be
displayed.
Hold
You can place a call on hold to keep the other party connected while you hang up the handset
or use other phone features.
Station With or Without a Call or Line Appearance
Station without Call Appearance OR Line Appearance
1. Place call on hold (primary line)
2. On-hook handset
3. Off-hook handset
4. Call is reconnected (automatically)
Station with Call Appearance
1. Place call on hold (primary line)
2. On-hook handset
3. Off-hook handset
4. Call Appearance line is selected (call is not reconnected automatically)
Station with Line Appearance
1. Place call on hold (primary line)
2. On-hook handset
3. Off-hook handset
4. Call is reconnected (automatically)
Station with Line Appearance
1. Place call on hold (line appearance line)
2. On-hook handset
3. Off-hook handset
4. Primary line is selected (call is not reconnected automatically)
To Next Page
Loading...
