Call Park 3-9
Using Wave Phone Features
Wave Phone User Guide
Self Park [ALL]
Self Park places a call in a parked state on your primary line for retrieval from other phones.
SIP PHONES
To Park a Call at Your Primary Line
With a party on the line:
1. Press Flash, then *64.
2. Dial the extension.
3. Listen for two beeps.
4. Hang up.
To Retrieve a Parked Call
From any phone:
1. Listen for the dial tone.
2. Press *65.
3. Dial the extension.
DIGITAL PHONES
To Park a Call at Your Primary Line
With a party on the line:
1. Press the pre-programmed Self Park button.
If your phone does not have a programmed Self Park button, press Flash, then *64 to
park a call.
2. Listen for two short beeps, and hang up.
If you leave a call parked for a long period of time, your phone rings back, and
PARK is
displayed.
To Next Page
Loading...
