Call Park 3-11
Using Wave Phone Features
Wave Phone User Guide
System Park [ALL]
Place a call in one of the ten “parking slots” on the Vertical Wave system for retrieval from
another phone.
SIP PHONES
Note: This feature is pre-configured on the 480i/CT, 9480i/CT, and all Aastra Series 5 models.
To Park a Call on the System
While on an active call:
1. Press the pre-programmed System Park button.
If your phone does not have a programmed System Park button, press Flash and dial *62
to park a call.
2. Listen for two beeps.
3. Hang up.
The display shows the parking slot number at which the call is parked. Make a note of
this number as you will need it to retrieve the call.
To Retrieve a Call Parked on System
From 480i/CT, 9480i/CT, or Aastra 5 Series models:
Press the RETRIEVE softkey, then enter slot number.
or,
From any other SIP phone model:
1. Press System Park.
If your phone does not have a System Park button, dial *63, the orbit number.
Note: The phone will automatically pause for approximately 3 seconds between each
digit. However, pressing the Dial button as mentioned above will quicken the retrieval
process.
2. Dial the parking slot number on which the call was parked.
3. Press the Dial softkey.
To Next Page
Loading...
