Mobile Extension 3-46
Using Wave Phone Features
Wave Phone User Guide
DIGITAL PHONES
To Retrieve Voicemail
Press the fixed MESSAGE button or a programmed Message Waiting button.
or,
If your phone has softkeys under the LCD display:
Press the VMAIL softkey.
If there are new voicemail messages in your mailbox, the number of new messages will
appear on the display (for example “
2 Msgs”).
Mobile Extension
A Wave mobile extension allows your remote phone to be treated as a Wave station. (A remote
phone is any phone that is external to the Wave system, for example your cell phone, your home
phone, or a legacy PBX phone from another phone system.)
Note: See details for using a Remote Phone with ViewPoint on page 6-16 in the ViewPoint User
Guide.
Using a Remote Phone without ViewPoint [ALL]
Placing calls from a remote phone
Placing an outbound call from your remote phone after logging into Wave requires permission.
Ask your Wave system administrator if this feature has been enabled for you.
To place a call from a remote phone without using ViewPoint
1. Call into Wave from your remote phone.
2. When the system prompts you to enter an extension, enter # <your extension> #
<your password> #.
3. Press # to get an internal dial tone.
4. Dial the number including the access code. (From internal dial tone, you can also
dial other Wave extensions, and use the * commands - see “Using * commands
from a remote phone” on page 3-45 for a list of available commands.)
Note: When placing a series of outbound calls from your remote phone, press **3 to end
each call instead of hanging up the phone. This keeps you connected to Wave. If you hang
up, you must call into Wave and log on again to place another outbound call.
To Next Page
Loading...
