Saved Number Redial 3-58
Using Wave Phone Features
Wave Phone User Guide
Saved Number Redial
This feature allows a user to save a number he has just dialed or is connected to on a button so
it can be easily re-dialed. Saved Number Redial requires a programmed Save/Repeat button on
your phone. Contact your System Administrator for more information.
Using Saved Number Redial [D]
DIGITAL PHONES
Saving a Number
While hearing ringback or while connected on a call, press Save/Repeat.
If the number to be saved is from an outgoing call, the number will be saved as dialed. If the
number to be saved is from an incoming call (and provided caller id for the call is available),
the Call Return access code will be added to the beginning of the number before saving so that
it can then be dialed.
Redialing a Saved Number
To Redial a Saved Number
From an idle phone:
Press Save/Repeat.
The most recently stored number will be dialed.
Storing the Saved Number as an Auto Dial
The Save/Repeat button is intended to be a quick method to temporarily store a number. Only
the number is stored; you are not prompted to enter a name and the value stored is not password
protected.
For numbers that you will used often, programming an AutoDial button is recommended (see
page 3-4).
To Program a Saved Number on an AutoDial Button
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until EDIT appears, then press the corresponding button.
3. Follow the prompts to enter the location and the name to be assigned to the
button.
When Number? appears on the screen:
4. Press Save/Repeat. The number stored at that button will be copied into the
AutoDial numbers.
To Next Page
Loading...
