User Programmable Buttons (On the Phone or Console) 3-68
Using Wave Phone Features
Wave Phone User Guide
Transferring a Call to Voicemail using a Feature Code
DIGITAL & SIP PHONES
While on a call:
1. Press Flash then press *83.
2. Dial the destination extension.
The caller is transferred; you may hang up.
ANALOG PHONES
To Transfer a Call to Voicemail
While on a call:
1. Press Flash, then #.
2. Press *83.
Hint: You can alternately press Flash, then press 2.
3. Dial the destination extension.
The caller is transferrred; you may hang up.
User Programmable Buttons (On the Phone or Console)
The following features can be set on the user programmable buttons:
In addition to choosing which feature is associated with an assigned button, you can also specify
select values for the keys.
Note: Some phones may have a programmed button (usually named “Program”) available for
performing these programming tasks. Contact your Wave System Administrator for more
information about whether or not a “Program” button exists on your phone.
• AutoDial • Extension Pickup • Save/Repeat
• Call Return • Group Pickup • System Speed
• Camp-on • Headset • Unassigned
• Do Not Disturb • Privacy • User Forward
• DSS/BLF • Restrict • Voicecall
To Next Page
Loading...
