Vertical Wave - Password Protection; Using Password Protection [D]

Password Protection 3-54
Using Wave Phone Features
Wave Phone User Guide
ANALOG PHONES
To Page a Specific Group/Zone
1. Press Page (Zone).
or,
Press *12, then the zone number.
2. Begin speaking.
3. Hang up to end the page.
Password Protection
You can configure your phone so that it requires a password before allowing user programming
such as editing the AutoDial buttons, programming feature buttons, and changing the voicemail
display. Contact your Wave System Administrator for information about password protection
settings.
Using Password Protection [D]
DIGITAL PHONES
To Activate/Deactivate Password Protection
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until PPROT appears, then press the corresponding button.
3. Enter the appropriate password, then press # or
Done.
4. Select
On to require a password before allowing user programming.
or,
Select
Off if you don’t want a password required.
Note: “111” is no longer the default password. The Admin must enter a unique password
when creating a user account.
Wave 4.0
June 2013