Vertical Wave - Feature Keys & Functions

DECT / Ranger Cordless Phones 6-3
About Wave Digital Phones
Wave Phone User Guide
Feature Keys & Functions
Feature Used to …
1
Display View information about the options and status of your phone.
2
TRANS Button Put a call on hold while you dial the destination extension number when
transferring call.
3
HOLD Button Place a call on hold and keep the party connected while you hang up or use other
phone features.
4
TALK Button Place a call or answer an incoming call.
5
Flexible Button* Contact your System Administrator.
6
Flexible Button* Contact your System Administrator.
7
CONF Button Reconnect (or toggle between) calls on hold when creating conference calls.
8
REDIAL Button Place a call to the last phone number you dialed from your phone.
9
SPEAKER Button Switch to Speaker mode to hear a caller instead of holding the handset.
10
MUTE Button Prevent the distant party from hearing any conversation at your end.
11
Flexible Button* Contact your System Administrator.
12
Flexible Button* Contact your System Administrator.
13
One Touch Dial Keys Access a phone number easily that you dial on a regular basis.
14
Headset Jack Speak to a caller when using a headset instead of holding the handset.
15
Ringer On/Off Button Adjust the handset ringer tone and volume.
16
Volume Up/Down Buttons Decrease/increase the loudness of the speaker or handset while on a call, or the
ringer when not on a call.
Note: *Flexible buttons must be set up in Administration.
Wave 4.0
June 2013