Phone Settings 6-44
About Wave Digital Phones
Wave Phone User Guide
Volume Reset Override
If your phone has a programmed Volume Reset Override button, you can use it to override the
volume reset feature. For example, if you are on a call, and you increase the volume. when you
hang up the phone the phone will reset the volume on the handset and headset to a safe level.
However, if you press the Volume Reset Override button, you can prevent the volume from
returning to the default volume level. This means that when your phone is off-hook, the handset
and headset levels will remain at the previous level.
Note: This feature is sometimes called “Volume Ring Override”.
Setting the Ring Volume and Tone
To Adjust the Ring Volume
On an idle phone:
Press VOLUME (up or down) keys to adjust the ring volume as needed.
You will hear a short ring that allows you to hear the current ring volume. The volume
level will also appear on the display.
To Set the Ring Tone
On an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until RING appears.
3. Press the sofkey under
RING.
4. Press the VOLUME (up or down) keys to adjust the ring tone as needed.
You will hear a short ring for each tone so that you can decide which one you want to use.
or,
On an Edge 700 phone:
Use the softkeys to change the ring tone as needed.
You will hear a short ring for each tone so that you can decide which one you want to use.
5. Press
DONE or SPEAKER to save the setting.
Lower Ringer Volume on Legacy Digital Phones
Note: This feature allows users with legacy phones to set the ringer volume lower than was
previously supported in Wave.
To Next Page
Loading...
