Vertical Wave - Redial; Using Redial [S]; [D]; Release; Using the Release Button [D]

Redial 3-57
Using Wave Phone Features
Wave Phone User Guide
Redial
Redial will place a call to the last phone number you dialed from the phone. Even if you dialed
digits while connected to a call, the system will only keep track of the phone number you dialed.
Using Redial [S] / [D]
SIP PHONES
Note: You can add Redial numbers to your Directory. See “Saving Numbers & Names to the
Directory” on page 3-31 for details.
To Redial a Number
Press Redial ().
Hint: To display the last number dialed, press PROG then press REDIAL. Press End Call
to clear the display.
• For 480i/CT and 9480i/CT models: press Goodbye ( ) or use the
DROP
softkey..
DIGITAL PHONE
To Redial a Number
Press Redial or #.
Hint: To display the last number dialed, from an idle phone press MENU then REDIAL
or #. Press SPEAKER to return the phone to idle.
Note: You can also use Saved Number Redial to save a number you have just dialed or to
which you are connected (see “Saved Number Redial” below).
Release
The Release button disconnects an active call, clears the display, mutes the speaker during a
page, and cancels transfers, conference calls, and the Program feature.
Using the Release Button [D]
DIGITAL PHONES
To Use the Release Feature Button
Press the
Release softkey.
Wave 4.0
June 2013