SIP Phone Feature Codes 5-32
About Wave SIP Phones
Wave Phone User Guide
FORWARD CALLS Forward Forward to Extension or External Number
from your own phone.
*43 + extension or
phone number
Note: Forwarding to an external number may require that you enter an access code or password.
See your System Administrator to see if this applies to you.
Cancel Cancel call forwarding *44
HOLD Initiate Place active call on hold: Flash
NIGHT ANSWER Activate Redirect all calls to a pre-configured
destination.
*85
Deactivate Cancel Night Answer *86
PAGE System Page Make a page to the public address system
and all the phone speakers on your system:
*11
Zone Page Make a page to a specific zone (group of
phones):
*12 + zone number
SUPERVISE CALLS Note: Supervise Call commands are available only if you have permission to use that command
and the user is configured to allow supervision with that command.
Coach Participate in a call so that only one user can
hear you, but any other party on the call
cannot.
*58 + extension
Join Participate in a phone call with two or more
parties, where all participants can hear you,
and you can hear them.
*59 + extension
Monitor Listen in on a conversation between a user
and at least one other party without being
heard by any of them.
Note: This is the same feature as Silent
Monitor for digital phones (see page 3-55).
*57 + extension
SYS SPEED DIAL Dial number Dial a frequently used extension or phone
number. Ask your System Administrator if
system speed dial numbers have been set up
for your use.
*89 + speed dial number
VOICECALL Direct page Direct a page to a specific digital phone
extension and allow the receiving party to
reply.
*82 + extension
To Next Page
Loading...
