Vertiv NetSure M830B User Manual

Vertiv™ NetSure™ Control Unit (NCU) User Manual
187
SW Maintenance Tab
Allows you to perform software maintenance procedures.
Figure 5.61 SW Maintenance Tab
Auto Config Procedure
The auto configuration feature scans the system for intelligent equipment connected to controller (such as SMDU, IB and EIB) and
configures these into the controller automatically.
To start the auto configuration process, click on the "Auto Config" button.
Figure 5.62 Auto Config

Vertiv NetSure M830B Specifications

General

Brand	Vertiv
Model	NetSure M830B
Category	Controller
Language	English