Vertiv™ NetSure™ Control Unit (NCU) User Manual
Alarms Tab
NOTE!
This list is dynamic and will only show you the equipment that you have in your system.
• Allows you to define the alarm level for each alarm. (See also Table 1.1 on page 3.)
• Allows you to map alarms to the alarm relays.
Figure 5.69 Alarms Tab
Procedure
1. Select the equipment type to display the alarms associated to it. Also displayed is the alarm level and alarm relay number
assigned to this alarm.
2. To modify the alarm level and/or alarm relay number, click on the “Modify” button for that alarm signal.
To Next Page
Loading...
