virtual access GW1000M Series

To Next Page

To Previous Page

15: Configuring DHCP server and DNS (Dnsmasq)

_______________________________________________________________________________________________________

_____________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 1.9 Page 122 of 350

dhcp.@dnsmasq[0].strictorder=0

dhcp.@dnsmasq[0].bogusnxdomain=1.1.1.1 2.2.2.2

dhcp.@dnsmasq[0].port=53

dhcp.@dnsmasq[0].dhcpleasemax=150

dhcp.@dnsmasq[0].ednspacket_max=1280

dhcp.@dnsmasq[0].dnsforwardmax=150

root@VA_router:~# uci show dhcp

config 'dnsmasq'

option domainneeded '1'

option rebind_protection '1'

option rebind_localhost '1'

option local '/lan/'

option domain 'lan'

option authoritative '1'

option readethers '1'

option leasefile '/tmp/dhcp.leases'

list interface 'lan'

list server '1.2.3.4'

list server '4.5.6.7'

list rebind_domain 'test1.domain'

list rebind_domain 'tes2.domain'

option logqueries '1'

option resolvfile '/tmp/resolv1.conf.auto'

list addnhosts 'hosts1'

list addnhosts 'hosts2'

option enable_tftp '1'

option tftp_root '/tmp/tftp'

option dhcp_boot 'boot.image'

option filterwin2k '1'

option nonegcache '1'

option strictorder '1'

list bogusnxdomain '1.1.1.1 '

list bogusnxdomain '2.2.2.2'

option port '53'

option dhcpleasemax '150'

option ednspacket_max '1280'

option dnsforwardmax '150'

virtual access GW1000M Series - Page 122