virtual access GW1000M Series - 13 Configuring an Ethernet Interface on a GW1000 Router; Configuration Packages Used; Configuring an Ethernet Interface Using the Web Interface

13: Configuring an Ethernet interface on a GW1000 router
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 95 of 350
13 Configuring an Ethernet interface on a GW1000 router
This section describes how to configure an Ethernet interface on a GW1000, including
configuring the interface as a DHCP server, adding the interface to a firewall zone and
mapping the physical switch ports.
13.1 Configuration packages used
Package
Sections
network
interface
route
alias
firewall
zone
dhcp
dhcp
13.2 Configuring an Ethernet interface using the web interface
To create and edit interfaces via the web interface, in the top menu, click Network ->
Interfaces. The Interfaces overview page appears.
Figure 49: The interfaces overview page