virtual access GW1000M Series - User Management Using UCI

12: Management configuration settings
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 91 of 350
option IgnoreServerCertificateStatus ‘0’
12.10 User management using UCI
User management is not currently available using the web interface. You can configure
the feature using UCI or Activator.
12.10.1 User management packages
Package
Sections
management_users
Users
12.10.2 Configuring user management
You can create different users on the system by defining them in the user management
configuration file. This gives users access to different services.
Web Field/UCI/Package Option
Description
General settings
Web: n/a
UCI: management_users.@user[x].enabled
Opt: enable
Enables/creates the user.
0
Disabled.
1
Enabled.
Web: n/a
UCI:
management_users.@user[x].username
Opt: username
Specifies the user’s username.
Web: n/a
UCI:
management_users.@user[x].password
Opt: password
Specifies the user’s password. When entering the user
password enter in plain text using the password option. After
reboot the password is displayed encrypted via the CLI using
the hashpassword option.
UCI: management_users.@user[x].hashpassword
Opt: hashpassword. Note: a SRP user password will be
displayed using the srphash option
Web: n/a
UCI: management_users.@user[x].webuser
Opt: webuser
Specifies web access permissions for the user. Note: webuser
will only work if linuxuser is set to Enabled.
0
Disabled.
1
Enabled.
Web: n/a
UCI:
management_users.@user[x].chapuser
Opt: chapuser
Specifies CHAP access permissions for the PPP connection.
Note: chapuser will only work if linux user is set to Enabled.
0
Disabled.
1
Enabled.
Web: n/a
UCI: management_users.@user[x].papuser
Opt: papuser
Specifies PAP access permissions for the PPP connection.
0
Disabled.
1
Enabled.
Web: n/a
UCI: management_users.@user[x].srpuser
Opt: srpuser
Specifies SRP access permissions for the PPP connection.
0
Disabled.
1
Enabled.
Web: n/a
UCI: management_users.@user[x].smsuser
Opt: smsuser
Specifies SMS access permissions for the user.
0
Disabled.
1
Enabled.
Web: n/a
UCI: linuxuser
Opt: linuxuser
Specifies linuxuser access permissions for the user.
0
Disabled.
1
Enabled.