virtual access GW1000M Series - Configuring Mobile Manager Using UCI

23: Configuring mobile manager
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 176 of 350
Web: Secondary Channel A
UCI:
mobile.main.cdma_secondary_channel_a
Opt: cdma_secondary_channel_a
Allows the secondary channel (A) to be changed
691
Default
1-2016
any band class 5 channel number
Web: Secondary Channel B
UCI:
mobile.main.cdma_secondary_channel_b
Opt: cdma_secondary_channel_b
Allows the secondary channel (B) to be changed
777
Default
1-2016
any band class 5 channel number
Web: Preferred Forward & Reverse RC
UCI:
mobile.main.cdma_preferred_forward_and_re
verse_rc
Opt:cdma_preferred_forward_and_reverse_rc
The Preferred Forward & Reverse RC value, this takes the
form "forward_rc,reverse_rc"
Format: forward radio channel, reverse radio channel
Default: 0,0
Web: SID-NID pairs
UCI: mobile.main.cdma_sid_nid_pairs
Opt:cdma_sid_nid_pairs
Allows specification of SID:NID pairs, this takes the form
"SID1,NID1,SID2,NID2, …
Format: SID1 (0-65535),NID (0-65535)
Default: 0,65535
Table 60: Information table for mobile manager CDMA settings
When you have made your changes, click Save & Apply and then reboot.
23.3 Configuring mobile manager using UCI
The following example shows how to enable the SMS functionality to receive and respond
from certain caller ID numbers.
uci set mobile.main=mobile
uci set mobile.main.sim1pin=0000
uci set mobile.main.sim2pin=0000
uci set mobile.main.roaming_sim=none
uci set mobile.main.sms=yes
uci set mobile.main.hdr_password=5678
uci set mobile.main.hdr_userid=1234
uci set mobile.main.init_get_iccids=yes
uci set mobile.@caller[0]=caller
uci set mobile.@caller[0].name=user1
uci set mobile.@caller[0].number=3538712345678
uci set mobile.@caller[0].enabled=yes
uci set mobile.@caller[0].respond=yes
uci set mobile.@caller[1]=caller
uci set mobile.@caller[1].name=user2
uci set mobile.@caller[1].number=3538723456789
uci set mobile.@caller[1].enabled=yes
uci set mobile.@caller[1].respond=yes
package mobile