virtual access GW1000M Series - Page 175

23: Configuring mobile manager
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 175 of 350
23.2.2 CDMA settings
Web Field/UCI/Package Option
Description
Web: Ordered Registration triggers module
reboot
UCI: mobile.main.
mobile.main.cdma_ordered_registration_rebo
ot_enabled
Opt:
cdma_ordered_registration_reboot_enabled
Enables or disables rebooting the module after Order
Registration command is received from a network.
0
Disabled.
1
Enabled.
Web: Station Class Mark
UCI: mobile.main.cdma_station_class_mark
Opt: cdma_station_class_mark
Allows the station class mark for the MS to be changed.
58
Default
0-255
Range.
Web: Slot Cycle Index
UCI: mobile.main.cdma_slot_cycle_index
Opt: cdma_slot_cycle_index
The desired slot cycle index if different from the default
2
Default
0-7
Range.
Web: Slot Mode
UCI: mobile.main.cdma_slot_mode
Opt: cdma_slot_mode
Specifies the slot mode
0
Default
TBA
Web: Mobile Directory Number
UCI:
mobile.main.cdma_mobile_directory_number
Opt: cdma_mobile_directory_number
Allows the mobile directory number (MDN) to be changed
Default
Programmed in module
Digits
up to 15 digits
Web: MOB_TERM_HOME registration flag
UCI: mobile.main.
cdma_mob_term_home_registration_flag
Opt:
cdma_mob_term_home_registration_flag
The MOB_TERM_HOME registration flag
0
Disabled.
1
Enabled.
Web: MOB_TERM_FOR_SID registration flag
UCI: mobile.main.
cdma_mob_term_for_sid_registration_flag
Opt:
cdma_mob_term_for_sid_registration_flag
The MOB_TERM_FOR_SID registration flag
0
Disabled.
1
Enabled.
Web: MOB_TERM_FOR_NID registration flag
UCI: mobile.main.
cdma_mob_term_for_nid_registration_flag
Opt:
cdma_mob_term_for_nid_registration_flag
The MOB_TERM_FOR_NID registration flag
0
Disabled.
1
Enabled.
Web: Access Overload Control
UCI:
mobile.main.cdma_access_overload_control
Opt: cdma_access_overload_control
Allows the access overload class to be changed
Default
programmed into module as part of IMSI
0-7
Range.
Web: Preferred Serving System
UCI:
mobile.main.cdma_preferred_serving_system
Opt: cdma_preferred_serving_system
The CDMA Preferred Serving System(A/B)
Default value is 5.
Web: Digital Analog Mode Preference
UCI: cdma_digital_analog_mode_preference
Opt: cdma_digital_analog_mode_preference
Digital/Analog Mode Preference
Default: 4
Web: Primary Channel A
UCI: mobile.main.cdma_primary_channel_a
Opt: cdma_primary_channel_a
Allows the primary channel (A) to be changed
283
Default
1-2016
any band class 5 channel number
Web: Primary Channel B
UCI: mobile.main.cdma_primary_channel_b
Opt: cdma_primary_channel_b
Allows the primary channel (B) to be changed
384
Default
1-2016
any band class 5 channel number