virtual access GW1000M Series - Automatic Operator Selection Diagnostics Via UCI

25: Automatic operator selection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 216 of 350
25.6 Automatic operator selection diagnostics via UCI
To check interfaces created in the multi-WAN package, enter:
root@VA_router:~# cat /var/const_state/multiwan
Figure 113: Example of output from the command: cat /var/const_stat/multiwan
To check interfaces created in the network package, enter:
root@VA_router:~# cat /var/const_state/network