virtual access GW1000M Series - View Routes Statistics

20: Configuring BGP (Border Gateway Protocol)
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 149 of 350
20.5 View routes statistics
To view routes statistics, in the top menu click Status -> Routes. The routing table
appears.
Figure 80: The routing table
To view routes via the command line, enter:
root@support:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-
lan2