virtual access GW1000M Series - Automatic Operator Selection Diagnostics Via the Web Interface

25: Automatic operator selection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 214 of 350
The multiwan package is stored on /etc/config/multiwan. To view the multiwan
package, enter:
root@VA_router:~# uci export multiwan
package multiwan
config multiwan 'config'
option enabled 'yes'
option preempt 'no'
option alt_mode 'no'
To see multiwan package via uci, enter:
root@VA_router:~# uci show multiwan
multiwan.config=multiwan
multiwan.config.enabled=yes
multiwan.config.preempt=no
multiwan.config.alt_mode=no
25.5 Automatic operator selection diagnostics via the web interface
25.5.1 Checking the status of the Multi-WAN package
When interfaces are auto created they are presented in the network and in the Multi-
WAN package.
To check interfaces created in the Multi-WAN package, from the top menu, select
Network -> Multi-WAN.
To check interfaces that have been created in the network package, from the top menu,
select Network -> Interfaces.