virtual access GW1000M Series User Manual

12: Management configuration settings
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 89 of 350
Web: Check Server Certificate
UCI:
httpclient.default.ValidateServerCertificate
Enabled
Opt: ValidateServerCertificateEnabled
Checks for the certificates presence and validity.
1
Enabled.
0
Disabled.
Web: Present Client Certificate to Server
UCI: httpclient.default.
PresentCertificateEnabled
Opt: PresentCertificateEnabled
Specifies if the client presents its certificate to the server to
identify itself.
1
Enabled.
0
Disabled.
Web: CertificateFile Format
UCI: httpclient.default.CertificateFormat
Opt: CertificateFormat
Specifies the value the client expects to see in the specified field
in the server certificate.
PEM
DER
Web: Certificate File Path
UCI: httpclient.default.CertificateFile
Opt: CertificateFile
Defines the directory/location of the certificate.
/etc/httpclient.crt
Range
Web: Certificate Key File Path
UCI: httpclient.default.CertificateKey
Opt: CertificateKey
Specifies the directory/location of the certificate key.
/etc/httpclient.key
Range
Web: N/A
UCI: ValidateServerCertificateFieldEnabled
Opt: ValidateServerCertificate
Defines the field in the server certificate that the client should
check.
1
Enabled.
0
Disabled.
Web: N/A
UCI:
httpclient.default.ActivatorChunkyDownlo
adPath
Opt: ActivatorChunkyDownloadPath
Enables partial download activations and active updates.
The default value is
httpclient.default.ActivatorChunkyDownloadPath=/activator/parti
al/download
The url (on activator) to which the client should send requests for
chunky image download.
Web: N/A
UCI: httpclient.default.ChunkSize
Opt: ChunkSize
Specifies the size of each packet payload
100k
100K Bytes
1-infinite
Available values
Web: N/A
UCI: httpclient.default.RateLimit
Opt: RateLimit
Throttle activation/active updates traffic received by device to
specified limit
None
By default there is no limit
1-infinite
Available values in kbps
Web: N/A
UCI: httpclient.default.CAFile
Opt: CAFile
Defines path to the certificate authority file stored on the router
Web: N/A
UCI:
httpclient.default.IgnoreServerCertificateS
tatus
Opt: IgnoreServerCertificateStatus
Defines whether to skip the status check on the server
certificate.
1
Enabled.
0
Disabled.
Table 20: Information table for HTTP client
12.8 Httpclient: Activator configuration using UCI
root@VA_router:~# uci show httpclient
httpclient.default=core
httpclient.default.Enabled=yes
httpclient.default.FileServer=10.1.83.36:80 10.1.83.37:80

virtual access GW1000M Series Specifications

General

Brand	virtual access
Model	GW1000M Series
Category	Network Router
Language	English