22: Configuring a mobile connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 172 of 350
22.4.2 Mobile status using UCI
To display information and status of mobile interfaces such as 3G, 4G or CDMA, enter:
root@VA_router:~# cat /var/state/mobile
mobile.3g_1_1_1=status
mobile.3g_1_1_1.auto_info=/etc/3g_1-1.1.auto
mobile.3g_1_1_2=status
mobile.3g_1_1_2.auto_info=/etc/3g_1-1.2.auto
mobile.3g_1_1_1.sim_slot=1
mobile.3g_1_1_1.sim_in=yes
mobile.3g_1_1_1.imsi=240016005892879
mobile.3g_1_1_1.registered=1, Home network
mobile.3g_1_1_1.reg_code=1
mobile.3g_1_1_1.registered_pkt=1, Home network
mobile.3g_1_1_1.reg_code_pkt=1
mobile.3g_1_1_1.area=FFFE
mobile.3g_1_1_1.cell=189150A
mobile.3g_1_1_1.tech=7
mobile.3g_1_1_1.technology=E-UTRAN
mobile.3g_1_1_1.operator=0,0,"Vodafone",7
mobile.3g_1_1_1.sim1_iccid=89460127120912066226
mobile.3g_1_1_2.sim_slot=1
mobile.3g_1_1_2.sim_in=yes
mobile.3g_1_1_2.operator="Vodafone"
mobile.3g_1_1_2.cdma_roaming=Not Roaming
mobile.3g_1_1_2.cdma_roaming_code=0
mobile.3g_1_1_2.cdma_srvmode=EVDO Rev B
mobile.3g_1_1_2.cdma_srvmode_code=5
mobile.3g_1_1_2.cdma_total_drc=0.0 kbps
mobile.3g_1_1_2.cdma_carr_cnt=2
mobile.3g_1_1_2.cdma_rx0=78
mobile.3g_1_1_2.sig_dbm=nan
mobile.3g_1_1_2.cdma_rx1=105
To Next Page
Loading...