virtual access GW1000M Series - Page 190

25: Automatic operator selection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 190 of 350
Figure 99: The interface overview page
Click Add new interface… The Create Interface page appears.
Figure 100: The create interface page
Web Field/UCI/Package Option
Description
Web: Name of the new interface
UCI: network.3g_s<sim-
number>_<short-operator-name>.
Opt: 3g_s<sim-number>_<short-
operator-name>.
Type the name of the new interface.
Type the interface name in following format:
3g_s<sim-number>_<short-operator-name>. Where <sim-
number> is number of roaming SIM (1 or 2) and <short-
operator-name> is first four alphanumeric characters of operator
name (as reported by 'AT+COPS=?' command).
Type the short operator name in lower case, for example:
Operator name
First four alphanumeric numbers
Vodafone UK
voda
O2 – UK
o2uk
Orange
oran